Material Composition of Technogenic Ores in Tails of Zhezkazgan Enrichment Factory (Central Kazakhstan)

2016

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.4028/www.scientific.net/amm.858.366
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Total reserves in tails in enrichment factories account for about 1.0 billion tons, and they contain copper, lead, zinc and precious metals. Therefore such tailings can be considered a major technological company and a reliable source of raw materials to build of processing company. We have studied the conditions of distribution and storage of tailings from enrichment plants. Microscopic description of the tailings material gave the following data. Chalcopyrite prevalent among the copper minerals covellite is most common in the second place, rare chalcocite, bornite, sphalerite, pyrite, arsenopyrite. The grain size of the sulfides is generally 0.01-0.03 mm. The sulfides are mainly quartz or fused to it. Rarely observed aggregates are covellite-bornite, chalcopyrite-covellite and chalcopyrite-bornite. However, not all sulphides ore sufficiently disclosed, most of them are located within grains the surrounding rocks. If disclosed ore minerals associated with grains of rocks less than 100 microns, they can be readily available for leaching. To increase the fullness of extraction of metals from sulfide located inside rock grains larger than 150-200 microns, additional measures for their opening.