Cooling process modeling of a periodically incoming liquid, using night radiation cooling

2018

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.1063/1.5051927
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Various methods of natural cooling are used to solve the problem of global warming and increase the energy efficiency of refrigeration systems. One of such methods is radiation cooling to outer space. In this paper we consider the possibility of using radiation cooling to lower the temperature of the liquid entering the processing once a day at 5:00. For cooling is proposed a system that is a cylindrical tank with a cooling casing. The coolant in the casing is cooled by the action of the radiators at night. The system is operated in the climatic conditions of the moderately cold climate of the Ust-Kamenogorsk city (Kazakhstan), located at 49°58’N. To assess the efficiency of the system, its mathematical modeling was carried out based on the solution of the heat balance equations. As a result of the simulation, data were obtained on the temperature and heat fluxes in the system during the year. It is found that the cooled liquid reaches the required temperature (<+ 5 °C) three hours after loading into the system for 123 days a year. The average daily specific cooling capacity of radiators reaches from 50 to 150 W/m2 in winter and in the summer this value does not exceed 30 W/m2.