Raman characteristics of multiwalled carbon nanotubes based on diatomite

2018

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.18321/ectj765
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

In this paper, the diatomite mineral from Mugalzhar field, Aktobe region, has been used as a matrix of catalyst particles to synthesize multiwall carbon nanotubes (MWCNTs) by Catalytic Chemical Vapor Deposition method (CCVD). As a source of carbon was used a propane-butane gas mixture, as a catalyst – Ni particles deposited from Ni(NO3)2 solution during heat treatment process at 400–500 °C. The CCVD method was conducted at a different temperature: 650 °C, 700 °C, 750 °C, 800 °C. Obtained MWCNTs were studied by Raman spectroscopy. The characteristics such as crystallinity, defectiveness, diameter of MWCNTs synthesized at different experimental conditions were evaluated from the positions and intensity ratios of Raman peaks of the samples. The results of investigations of the properties of the obtained carbon nanotubes show the dependence of MWCNTs characteristics on CCVD method temperature. The observation of changes in all the three peaks – D, G and 2D, of obtained materials exhibit, that MWCNTs synthesized at 800 °C possess high crystallinity, low defectiveness and larger diameters as compared with carbon nanotubes grown at 650 °C, 700 °C, 750 °C.