Design of a Smartphone Plastic Optical Fiber Chemical Sensor for Hydrogen Sulfide Detection

2017

Полный текст Открытый доступ: Green Метаданные (CSL-JSON)
DOI 10.1109/jsen.2017.2752717
Достоверность данных 85 высокая
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

We present a low-cost, handheld plastic optical fiber (POF) sensor for hydrogen sulfide (H2S) detection integrated onto a smartphone. The sensor uses smartphone flashlight as a source and camera as a pixel-based intensity detector. The POF is interconnected to the smartphone with a 3-D-printed connector on both source/detector sides. The sensing mechanism is embedded in the fiber link, making the system an all-fiber smartphone architecture. A mobile application handles data acquisition on the Android operative system. The sensor is functionalized for H2S detection through silver deposition on the POF outer surface. Experiments demonstrate the feasibility of the sensor system as the presence of H2S is successfully measured through an increase of optical losses through the POF link. This cost-effective, scalable, and compact sensor is promising for application in environmental sensing.