Recovery of niobium pentaoxide and ammonium sulfate from titanium-magnesium production waste

2023

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.12911/22998993/171647
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

This study was aimed to investigate the development of a technology for the extraction of niobium pentaoxide and ammonium sulfate from titanium-magnesium production waste, specifically, the sublimates of dust chamber into concentrate in the form of niobium pentoxide.Optimal conditions for washing the niobium hydroxide precipitate by repulpation with hot (60-70°C) distilled water, drying at 200°C for 6 hours were determined.The influence of temperature and duration of the process was studied.Optimal conditions for the dynamic desorption of niobium from saturated ionite (Purolite A100) was determined.The results further indicated that the optimum quantity of the solution of desorption with sulfuric acid was equal to 5.5% and ammonium oxalate was equal to 4%, while temperature and the flow rate of the desorbing solution was 22-27°C and 6 rpm, respectively.The study of the precipitation of niobium from sulfuric acid desorbates showed that the interaction of niobium ions with ammonia takes place at a low rate.The degree of precipitation of niobium hydroxide equal to 99.6% was achieved in 7 hours of agitation of the suspension at a temperature of 22-25°C.