Synthesis and Evaluation of Novel Graphene Oxide-Based Comb-Polymer Viscosity Reducer for Heavy Oil

2026

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.1021/acs.energyfuels.5c05915
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

To tackle the challenges of high viscosity, poor fluidity, and low recovery rates in heavy oil, a novel comb-like polymer viscosity reducer (GO-Z) based on nanographene oxide (GO) was developed. GO was first functionalized with a silane coupling agent and then grafted with long-chain alkyl (C16DMAAC) and polyether (APEG-8) groups. The results show that GO-Z exhibited superior emulsification, dispersion, and viscosity reduction properties under microagitation conditions (simulating the low-shear conditions of real reservoirs), achieving over 94% viscosity reduction at a concentration of 0.3 wt %. Physical simulation flooding experiments further demonstrated that GO-Z effectively improved heavy oil recovery at various injection rates, with the highest increase reaching 11.61%. This study opens up a clear and promising path for the application of functionalized GO in the emulsification and viscosity reduction of heavy oil cold production.