Application of electric pulse and ultrasonic mufflers for increasing the degree of exhaust gas purification in car engines

2024

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.53894/ijirss.v8i1.3570
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

The purpose of the article is to compare the efficiency of using electro-pulse and ultrasonic mufflers for cleaning exhaust gases from internal combustion engines of automobiles. The authors have developed full-size stands for conducting experiments with both types of mufflers on gasoline and diesel engines. Experimental studies have shown that electro-pulse mufflers are more effective in reducing the smoke of diesel engine exhausts, while ultrasonic mufflers are promising for cleaning exhaust gases from solid particles of gasoline engines. In the electro-pulse muffler, at the considered values of the angular velocity of the engine, the smoke indicators of the gas decreased to approximately 30%, while in the ultrasonic one, to 15%. The changes in the mass of the sold particles in the ultrasonic muffler of a diesel engine and a comparison with a gasoline engine show that ultrasonic mufflers have a lot of potential to stop solid particles from forming in the gas flow. In particular, the mass of the precipitated particles in a gasoline engine is 3 times greater than in a diesel engine. The alternative mufflers studied in the article allow for the purification of exhaust gases from solid particles, reducing their negative impact on the environment and giving impetus to the development of environmentally friendly motor transport.