Torsional Strength of Recycled Coarse Aggregate Reinforced Concrete Beams

CivilEng, 2023

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.3390/civileng4010004
Достоверность данных 85 высокая
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

This study discusses the torsional capacity of recycled coarse aggregate (RCA) reinforced concrete beams under pure torsion based on the experimental findings available in the literature. The experimental data on RCA specimens were collected and compared with the conventional concrete specimens with key variables, such as compressive strength and longitudinal and transverse reinforcement ratios, as those variables affect the torsional capacity of reinforced concrete beams. Overall, the database consisted of experimental results from 30 RCA specimens and 256 natural coarse aggregate (NCA) specimens. The result shows that specimens with a 100 % replacement ratio have the lowest strength. In addition, as the structural mechanism of torsion is similar to the shear mechanism in reinforced concrete beams, a comparative analysis was performed with RCA specimens subjected to shear force. It was concluded that the RCA has a similar effect in strength reduction for the specimens subjected to torsion or shear with a 100% replacement ratio. However, further study and experimental evidence are required to confirm the applicability of the recycled aggregate to produce and design the structural members.