Microstructure and Mechanical Properties of Multilayer α-AlN/α-BCN Coating as Functions of the Current Density during Sputtering of a B4C Target

2018

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.1134/s1063783418100220
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Multilayer AlN/BCN coating of nanometer scale have been prepared by magnetron sputtering of Al and B 4 C targets in an argon–nitrogen atmosphere during deposition on a Si substrate. These coating have an X-ray amorphous structure and the maximum Knoop hardness of 27 GPa (at the current density 100 mA). The first-principle molecular dynamics calculations show that the B4–BN layer is dynamically unstable; thus, it will not be epitaxial and will be amorphous or have a structure different from the B4–BN structure. The thermal vacuum annealing from 600 to 800°C of samples with multilayer nanosized coating leads to the decrease in the Knoop hardness to 18 GPa; however, the coating structure is retained X-ray amorphous.