Аннотация
This study investigates how pulsatile injection influences two-phase displacement efficiency in a pore-scale micromodel, with emphasis on the roles of porosity, amplitude, and frequency. Simulations were performed using a conservative level-set formulation in COMSOL Multiphysics across three porosity levels (φ ≈ 0.75, 0.50, 0.30) and a range of amplitudes (25–75%) and frequencies (0–200 Hz), with fixed fluid properties and wettability. In the baseline (non-pulsed) regime, residual saturation decreased with increasing inlet velocity but reached a plateau, indicating a velocity-limited mobilization. Superimposing sinusoidal pulsations led to improved displacement only within finite frequency bands. For each porosity, a “working window” emerged, where residual saturation reached a minimum: this optimum shifted toward lower frequencies and higher amplitudes with decreasing φ. These trends were quantified using the normalized residual saturation Sres/Sref and linked to the dimensionless Strouhal number St, defined via the capillary time scale. Phase maps and velocity fields confirmed that at optimal conditions, pulsations activated transverse throats and suppressed capillary bridges, while excessive frequencies led to inefficient re-entrapment. A fixed observation time was used to enable consistent comparison across regimes. The findings delineate the parameter ranges under which pulsations yield tangible benefit and suggest practical guidance for tuning flow modulation based on pore structure.