Selective Recovery of Cobalt and Nickel from Spent Lithium-Ion Battery NMC Cathodes Using a Hydrophobic Deep Eutectic Solvent

2025

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.3390/met15101113
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

A hydrophobic deep eutectic solvent (HDES) composed of Aliquat 336, decanoic acid, and n-hexanol, diluted with kerosene, was investigated for the selective leaching of LiNi0.33Mn0.33Co0.33O2 (NMC-111) cathode materials. While conventional choline chloride-based DESs co-dissolve Li and transition metals almost completely, the present HDES–acid hybrid system deliberately sacrifices maximum recovery to achieve selectivity. In combination with a low concentration of H2SO4, the HDES enabled preferential dissolution of Co and Ni (~84% and ~80% after 6 h at 90 °C, respectively), while Li and Mn largely remained in the solid residue (>93%). Kinetic modeling indicated that the process is controlled by a surface chemical reaction with apparent activation energies of ~~49 kJ mol−1 (for Ni recovery) and ~51 kJ mol−1 (for Co recovery). The leaching residues were enriched in stable Li-Mn-O phases in a way that offers a basis for stepwise recovery. These findings show that hydrophobic eutectic media coupled with mild acid activation provide a sustainable pathway for the selective recycling of LIB cathodes.