Centralized Protections of Busbars and Electric Motors Connected to Them

2021

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.1088/1742-6596/2096/1/012172
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Abstract Centralized protections have several advantages over autonomous protections; however, incorrect actions of the former can result in more serious consequences. The reliability of their operation can be ensured with the help of majorization principle, but the number of devices with different principles of operation is insufficient so far. Three centralized protections are suggested; one of them allows duplication of current transformers. They all are based on the fact that the electric motors of feeders feed a short-circuit point; as a result, the current in a feeder damaged becomes higher than the current at the power input, and the currents in undamaged feeders change the direction to opposite. The conditions for protection actuation are presented. Operation of the protections in different modes is described in detail.