Energy Generation and Carbon Footprint under Future Projections (2022–2100) of Central Asian Temperature Extremes

2025

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.1002/gch2.202400356
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Abstract Limiting the global temperature rise to 1.5 °C is becoming increasingly difficult. The study analyzed data from 700 locations (1962–2100) to assess climate change impacts on heating‐cooling energy and carbon footprint in under‐researched Central Asia (CA). Under SSP2‐4.5, icing and frost days reduce, while summer days and tropical nights increase. Central Asian countries will see an increase in cooling needs despite the projected decline in heating demands, with Kyrgyzstan experiencing the highest rise in cooling degree days, projected to increase by 132% and 165% in the near‐future under SSP2‐4.5 and SSP5‐8.5, respectively. As a result, cooling energy generation is expected to rise by 39% and 92% under SSP2‐4.5 and SSP5‐8.5, respectively. However, CO2 emissions for cooling are much lower in Kyrgyzstan and Tajikistan due to their reliance on renewable energy. CO2 emissions in these countries are projected to be ≈10 times lower than in other parts of CA. From 2022 to 2100, cooling‐related emissions are estimated to increase by 41% and 80% under SSP2‐4.5 and SSP5‐8.5, respectively across CA. Urgent adaptation is needed for resilient cities and stable power by expanding renewables, modernizing infrastructure, boosting efficiency, adopting policies, and fostering cooperation.