“Cold Curing” of Polyethylene Glycol Maleate with Acrylic Acid and Some Physicochemical Properties of Their Solutions

2022

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.31489/2022ch2/2-22-22
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

The possibility of using the copolymers based on unsaturated polyesters with acrylic acid (AA) as the main component (polymeric basis) for the creation of novel highly effective sealants and glues of domestic produc-tion was demonstrated. Polyethylene glycol maleate (p-EGM) was synthesized by step-growth polymeriza-tion of maleic anhydride with ethylene glycol using the catalyst, which shortened the process duration. A number of solutions of p-EGM with AA were obtained. Physicochemical characteristics of initial solutions were determined. Some rheological properties of the solutions of p-EGM in unsaturated carboxylic acid were studied. Radical polymerization — the process of “cold curing” of the solutions of p-EGM with AA at room temperature was carried out. The combination of initiating a system of cold curing consisting of initiator (benzoyl peroxide) and promoter (dimethylaniline) was selected and their optimal content in the initial mon-omer mixture was established. The main parameters of curing, namely gelation time and curing time, were determined. Identification of the copolymers was performed using IR-spectroscopy. The morphology of the surfaces of cured samples of p-EGM with AA was studied using SEM. The optimal composition requiring further studies as highly filled compositional polymeric materials for using as sealants and glue basis was es-tablished.