Efficient Copper Recovery from Chalcopyrite Using an «Isopropanol–Sulfuric Acid–Sodium Dodecyl Sulfate» System

2023

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.3390/min13101346
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

In this study, SDS is used to enhance the sulfuric acid leaching of chalcopyrite in aqueous and isopropanol media. The presence of SDS increased copper extraction into the solution in both solvents. However, it was the “isopropanol–sulfuric acid–SDS” system that proved to be particularly effective for copper recovery from chalcopyrite. The positive effect of SDS can be attributed to the reduction in the solution’s surface tension and the enhancement of mineral wetting. Additionally, the presence of SDS as a surfactant induces changes in the adsorption patterns of formed sulfur species on the mineral surface. SDS competes with sulfur for occupancy on the surface binding sites. This competitive interaction has the potential to diminish the formation of a substantial sulfur layer on the mineral surface. Under optimal conditions (isopropanol media, 2 M H2SO4, 65 °C, 120 min, 0.6 g/L SDS), copper recovery into the solution was 83%, and this is a considerable achievement for chalcopyrite leaching at ambient pressure in the absence of strong oxidizers.