Prediction of Oil Sorption Capacity on Carbonized Mixtures of Shungite Using Artificial Neural Networks

2023

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.3390/pr11020518
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Using the mixture of carbonized rice husk and shungite from the Kazakhstan Koksu deposit and the experimentally determined oil sorption capacity from contaminated soil with oil originating in the Karazhanbas oil field, a set of Artificial Neural Network (ANN) models were built for sorption predictions. The ANN architecture design, training, validation and testing methodology were performed, and the sorption capacity prediction was evaluated. The ANN models were successfully trained for capturing the sorption capacity dependence on time and on a carbonized rice husk and shungite mixture ratio for the 10% and 15% oil-contaminated soil. The best trained ANNs revealed a very good prediction capability for the testing data subset, demonstrated by the high coefficient of the determination values of R2 = 0.998 and R2 = 0.981 and the mean absolute percentage errors ranging from 1.60% to 3.16%. Furthermore, the ANN sorption models proved their interpolation ability and utility for predicting the sorption capacity for any time moments in the investigated time interval of 60 days and for new values of the shungite and rice husk mixture ratios. The ANN developed models open opportunities for planning new experiments, maximizing the sorption performance and for the design of dedicated equipment.