MULTICOMPONENT SEISMIC ASSESSMENT OF A 16-STORY RC BUILDING IN ALMATY USING EUROCODE 8

2026

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.51488/1680-080x/2026.1-16
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

This study presents a numerical assessment of a 16-story cast-in-place concrete building in Almaty, Kazakhstan, under static and multi-component seismic actions in accordance with SP RK EN 1998-1:2004/2012 and SP RK 2.03-30-2017. A finite-element model was developed in LIRA-SAPR for a wall structural system with coupled shear walls on type IB soils. The analysis explicitly accounts for both horizontal and vertical earthquake components; modal responses are combined using the SRSS or CQC methods, considering more than 20 vibration modes along the X, Y, and Z axes (ag = 0.487 g; avg = 0.438 g). The cumulative modal participation masses reach 89.8% in X and Y, indicating adequate capture of the dynamic response. Maximum interstory drifts are 5.5 mm (X) and 6.3 mm (Y), and roof displacements are 75 mm and 85 mm, respectively – within the relevant code limits. The building satisfies stability and seismic-resistance criteria; for structures higher than 12 stories in a 9-intensity seismic zone, the necessity of Special Technical Conditions (STU) is confirmed. The novelty lies in a practice-oriented implementation of Eurocode provisions adapted to Kazakhstan, with explicit treatment of the vertical component and multi-component spectral analysis, improving demand estimates and the applicability of results to high-rise design in seismically active regions.