IMPLEMENTATION OF MULTI-AGENT FRAMEWORK OF IMPALA FOR A SINGLE ZONE TEMPERATURE CONTROL OF A SIMULATED THERMAL ZONE

Herald of Kazakh-British technical university, 2026

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.55452/1998-6688-2026-23-2-218-232
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Buildings account for a significant portion of global energy consumption, with HVAC and humidity-control systems representing the majority of their operational demand. Traditional rule-based strategies often fail to adapt to dynamic indoor-outdoor conditions, motivating the use of data-driven control methods. This study presents a multiagent reinforcement learning (MARL) framework for simultaneous temperature and humidity control in a singlezone building modeled in EnergyPlus. The proposed approach employs the distributed Importance Weighted ActorLearner Architecture (IMPALA) algorithm with centralized training and decentralized execution (CTDE), enabling two agents: temperature and humidity to learn coordinated policies directly from high-fidelity simulation feedback. The results demonstrate strong learning performance: both agents improved their per-step rewards substantially (temperature +18.9%, humidity +33.7%), indicating effective convergence and cooperative behavior. The learned controller maintained thermal comfort comparable to the rule-based baseline (mean occupied temperature difference ≈ 0.04 °C; occupied PMV ≈ 0.45) while achieving notable energy savings. Total annual HVAC energy consumption decreased by 8.9%, with the most significant improvement observed in humidification energy, which was reduced by 34.4%. Heating and cooling loads remained nearly unchanged, confirming that energy reductions were achieved without compromising comfort.