Experimental Study of a Composite Modifying Additive Based on Industrial By-Products for Enhancing Durability of Portland Cement Concrete

Infrastructures, 2026

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.3390/infrastructures11060191
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

This article presents the results of tests evaluating the physical and mechanical properties of a modified hydraulic concrete formulation based on Portland cement, intended for use in general construction. The additive consists of post-alcohol distiller’s grains (PaB), soapstock (Sp), caustic soda (NaOH), granite dust (Gr) and acrylic latex (Lx). These components contribute to transforming the strength characteristics of concrete in compression and bending, as well as its water absorption, water permeability and chemical resistance. Based on the results obtained, the effectiveness of the additive was assessed, as was the quantitative improvement in concrete properties, including an evaluation of the life cycle of reinforced concrete structures in aggressive environments. According to the research results, an optimal composition was obtained which increases compressive strength by 6.2%, flexural strength by 7.9%, decreases water absorption by 50.1%, decreases the filtration coefficient by 97.4%, and increases chemical resistance by 42.8%.