Studying Radiation-Radon Safety of Building Materials and Residential Buildings of the Karaganda Region

2026

Полный текст Открытый доступ: Hybrid Метаданные (CSL-JSON)
DOI 10.52209/2706-977x_2026_1_37
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

The objective of the study is to assess the radiation and radon safety of building materials and structures and to develop material science recommendations to reduce radon hazard. The study included 78 residential buildings in the Akchatau settlement of the Karaganda region that were built in different periods and using various materials: brick, natural stone, cinder blocks, foam blocks and concrete. The methodology included determining specific activity of natural radionuclides (Ra-226, Th-232, K-40) by gamma spectrometry using a high-resolution detector, as well as measuring radon emanation with Alfarad Plus and Ramon-Radon devices. The mineral composition of materials and their porosity that affect radon permeability were analyzed. The results showed that in a number of houses, the equivalent equilibrium concentration of radon in the premises exceeded sanitary and hygienic standards by tens of times, while the maximum values were recorded in buildings made of brick and stone quarried in areas of granite massifs. It was found that increased porosity and cracking of materials, as well as the presence of uranium-containing minerals, significantly increase radon emission. Based on the analysis, measures to reduce radon hazard were proposed: the use of concrete mixtures with low radioactivity, barrier membranes, sealing coatings and effective ventilation