Аннотация
This study explores the use of diatomite from West Kazakhstan as a silica-containing raw material for borosilicate glass production. Three glass batches, based on quartz sand, chalk, and diatomite, were synthesized with varying ratios of network-forming and modifying oxides. Partial replacement of quartz sand with diatomite enabled glass melting at 1150 °C, producing a homogeneous melt. Glasses with higher diatomite content showed improved chemical and water resistance; specifically, the sample containing 52% diatomite achieved hydrolytic class III and water resistance class IV (XA = 1.0 cm3·g−1), whereas quartz-based control samples corresponded to classes IV–V. Heat resistance ranged from 120 to 160 °C depending on composition. These findings demonstrate that amorphous SiO2 and active oxides in diatomite promote a stronger three-dimensional glass network, highlighting the potential of locally sourced diatomite as an alternative SiO2 source for sustainable, energy-efficient borosilicate glass production.