Optimal size of beryllium pebbles as a neutron multiplier − helium recoil calculations aiming for swelling reduction and new proposal of neutron multiplier for advanced high-temperature tritium breeding blanket

2026

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.1016/j.nme.2026.102106
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

• The relationship between the size of beryllium and helium recoil release was studied using the PHITS code. • Within the studied diameter range (10 μm to 1 mm), a smaller beryllium particle size enhances helium recoil release. • A 10 μm beryllium sphere filled with lead is proposed as a candidate material for advanced tritium breeding blankets. The relationship between the size of the neutron multiplier (diameters ranging from 10 μm to 1 mm) and helium recoil release was studied using the PHITS code to reduce swelling actively. The results indicate that a smaller particle size enhances helium recoil release. However, smaller spheres are more affected by helium irradiation from neighboring spheres. To mitigate this effect, a 10 μm beryllium sphere filled with lead is proposed as a candidate material for advanced tritium breeding blankets designed for high-temperature operation. This lead-filled material is attractive because molten lead can remove helium from the system while improving both the tritium breeding ratio and the neutron-shielding performance of the fusion blanket.