Complex Oxidized Copper Ore Electrochemical Sulfidization Using Elemental Sulfur

2022

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.52209/1609-1825_2022_4_110
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

A new method of electrochemical sulfidization of oxidized complex (refractory) copper ores was developed. Elemental sulfur was used as a sulfidizing agent to increase the dressing rates. Using the Seidel-Gauss method, the effect of the current density, the concentration of sulfuric acid, the sulfidizing agent, sulfur, the electrolyte temperature, the electrolysis duration on the degree of copper extraction into the flotation concentrate was studied. A mathematical model for the copper recovery into the concentrate was obtained and a nomogram was calculated. It follows that under electrolysis conditions at the optimal concentration of the sulfidizing agent, elemental sulfur, sulfuric acid, the current density, the electrolyte temperature, the electrolysis duration, the degree of copper extraction into the flotation concentrate reaches its maximum value ≥ 95.0%.