DETERMINATION OF PHARMACEUTICAL-TECHNOLOGICAL PARAMETERS OF THE PLANT RAW MATERIAL EUPHORBIA HUMIFUSA WILLD.

Actual Problems of Theoretical and Clinical Medicine, 2025

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.64854/2790-1289-2025-49-3-09
Достоверность данных 85 высокая
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Today, the development of pharmaceutical substances based on biologically active compounds from plants is highly relevant. In this context, it is of great importance to explore methods for the optimal extraction of biologically active substances from the raw material of the plant Euphorbia humifusa Willd., which grows in our country and is rich in biologically active compounds. Obtaining an extract that meets pharmacopoeial requirements, as well as determining the technological parameters of the plant raw material, is crucial for the research. This scientific article presents the results of the pharmaceutical and technological parameters of the raw material from the plant Euphorbia humifusa Willd. The purpose of this study. To determine the pharmaceutical and technological parameters of the aerial part of the plant Euphorbia humifusa Willd. Methods and Materials. The research material consisted of the leaves and stems of Euphorbia humifusa Willd. Pharmaceutical and technological parameters of the plant raw material were determined, including specific gravity (dу, g/cm³), bulk density (d₀, g/cm³), tapped density (dH, g/cm³), porosity of the raw material, voidage of the raw material, free volume of the raw material layer (V), and the absorption coefficient of the extractant (Х, ml/g). Results. The following parameters of the plant raw material were determined during the study: specific gravity (dу) – 1.31±0.017 g/cm³, bulk density (d₀) – 0.32±0.010 g/cm³, tapped density (dH) – 0.12±0.002 g/cm³, voidage – 0.75±0.014 g/cm³, porosity of the raw material – 0.60±0.005 g/cm³, and free volume of the raw material layer – 0.90±0.011 g/cm³. Additionally, pharmacopeial quality indicators of the plant raw material were established: moisture content, 7.95±0.05%; total ash, 6.63±0.12%; and ash insoluble in a 10% HCl solution, 1.25±0.10%. The contents of heavy metals, such as cadmium, mercury, lead, and arsenic, and radionuclides, such as strontium-90 and cesium-137, in Euphorbia humifusa Willd. were within permissible limits. Conclusion. Cadmium and mercury heavy metals were not detected in the composition of Euphorbia humifusa Willd., while the levels of lead and arsenic comply with the standards established in Pharmacopoeial Article 1.5.3.009 “Determination of Heavy Metals in Medicinal Plant Raw Materials and Herbal Preparations.”