Investigation of the Influence of Technological Regimes of Thermocyclic Electrolyte-Plasma Treatment On The Structural-Phase State and Tribocorrosion Properties of 12Kh1MF Steel

2025

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.31489/2025ph3/84-94
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

This paper presents the results of a detailed study on the influence of thermocyclic electrolyte-plasma treatmenton the structural-phase state, microhardness, and tribocorrosion properties of heat-resistant steel12Kh1MF. The treatment was carried out using a 10 % Na2CO3 aqueous solution and a voltage of 300/150 V.It resulted in the formation of a zonal microstructure with a martensitic surface layer up to 600 μm thick. Thestructure was divided into zones: hardened, thermal influence, and base material. Microhardness increased by1.5 times due to martensitic transformation. X-ray analysis confirmed the formation of α′Fe and Fe3C phases.Tribological tests showed a 10 % reduction in the friction coefficient and a 1.5–2-fold increase in wear resistance.Corrosion tests in a salt fog chamber revealed enhanced protective properties, with mass loss reducedand corrosion resistance improved by 10–30 %, depending on the treatment mode. Based on a comprehensiveanalysis, the most effective thermocyclic treatment mode was identified, ensuring an optimal balanceof mechanical strength and corrosion resistance. The findings highlight the high potential of thermocyclicelectrolyte-plasma treatment as a promising method for enhancing the surface properties of steel componentsoperating in aggressive environments.