Development and Calibration of a Dynamic Gas Supply System for Straw Detector Applications

2025

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.1088/1742-6596/3089/1/012002
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Abstract Straw tube detectors are widely employed in cosmic ray and high-energy physics experiments for their high spatial and temporal resolution. The stability and precision of their operation strongly depend on the composition of the working gas mixture. This work presents the development and calibration of a dynamic gas supply system designed for use with straw detectors. The system integrates RRG-12 and RRG-15 mass flow controllers regulated via a KGS-3 control unit, enabling real-time mixing and flow control of Ar/CO₂ mixtures. Flow calibration using the volumetric water displacement method confirmed a linear correlation between controller settings and actual flow rates, with deviations below 6%. Additionally, spectral calibration was carried out using an Fe-55 radioactive source to fine-tune gas composition by comparing the ionization response with that of a reference gas mixture. The results demonstrate that the system provides accurate, stable, and reproducible gas delivery suitable for both laboratory use and large-scale experimental setups involving straw detectors. Future applications include muon track reconstruction using the developed gas system.