Investigation of Waste-Based Self-Compacting Concrete: Analysis of Rheology and Hydration with Silica Fume and Fly Ash

ES Materials & Manufacturing, 2025

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.30919/mm1498
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

This paper presents the results of a study on the effect of silica fume and fly ash on the properties of self-compacting concrete (SCC). Mineral additives were used as a partial replacement for cement at dosages of 5, 10, and 15% by binder mass. The properties of cementitious systems were evaluated using isothermal calorimetry to study hydration processes, scanning electron microscopy (SEM) for microstructure analysis, and rheological tests to determine the flow characteristics of cement mortar. The results showed that the incorporation of silica fume increases the viscosity and yield stress of the cement mortar, enhancing its structural stability. Fly ash also increases viscosity and yield stress but exhibits more pronounced thixotropic behavior, leading to structural instability at low shear rate gradients. Calorimetric studies revealed that silica fume accelerates the early stages of cement hydration, whereas fly ash, on the contrary, slows down hydration processes. Microstructural analysis confirmed that the addition of mineral additives contributes to the formation of a denser and more homogeneous cement matrix. The obtained results suggest that silica fume can be recommended as an effective additive for improving the structural stability of SCC, while fly ash is beneficial for enhancing thixotropic properties and strength development.