Influence of Hydrothermal Treatment Conditions on the Formation of Lanthanum Orthophosphate Nanoparticles of Monazite Structure

2020

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.1134/s1070427220040084
Деректер сенімділігі 85 жоғары
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Abstract The inluence of the heat treatment conditions and of the time of hydrothermal treatment at 210°С on the phase composition and size of crystallites and nanoparticles of lanthanum orthophosphate (LaPO4) was considered. The heating conditions in the course of hydrothermal synthesis of LaPO4 influence the structural transition of lanthanum orthophosphate of rhabdophane structure into the phase of monazite structure, and also the particle morphology and crystallite size. The phase of monazite structure with the crystallite size of approximately 12 nm without rhabdophane impurity is formed after hydrothermal treatment at 210°С for 30 min in the case of microwave heating of the hydrothermal fluid. When using external heating of autoclaves, at the same temperature inside the autoclave, the mean size of the crystallites of the monazite phase formed is 17 nm.