IMPACT OF THE ANNEALING TEMPERATURE OF IN2O3 FILMS ON THE PHOTOVOLTAIC CHARACTERISTICS OF A POLYMER SOLAR CELLS

Eurasian Physical Technical Journal, 2022

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.31489/2022no1/34-39
Деректер сенімділігі 85 жоғары
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

It is necessary to determine the effect of thermal annealing on morphology, absorption, and photoelectric propertiesforincrease the efficiency of electronic transport of In2O3films. The paper presents the results of a study the effect of the annealing temperature of In2O3films obtained by spin-coating on the optical and photo-electrophysical characteristics of a polymersolar cell.It is established that an increase in the annealing temperature of films leads to an increase in the absorption and optical width of the band gap of the film.Has been determined the optimal annealing temperature of the films T = 300°C, at which the electrons in the photoactive layer has the maximum lifetime of charge carriers and a low probability of recombination. At this temperature is observed, the maximum value of the efficiency of polymer solar cell.