Numerical modelling biogas combustion in the novel burner

2022

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.1109/eeae53789.2022.9831416
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

This article presents the results of numerical simulation of a novel biogas burner. The burner uses biogas with the composition 60% - СН4 и 40% - СО2. The basics for modeling are given, as well as the results of modeling. Analysis of the results shows that with an increase in excess air, there is a possibility of reducing the concentration of nitrogen oxides by 58% from the base value at excess air ratio α=1. The conducted numerical study showed that the use of preliminary fuel preparation is one of the most effective ways to reduce the concentration of nitrogen oxides. Pre-mixing reduces local "rich" fuel concentrations in the combustion zone, which reduces the formation of high-temperature zones in these areas. As is known, the formation of nitrogen oxides primarily depends on temperature; therefore, the decrease in local high temperatures reduces the concentration of NOx.