EXPERIENCE OF APPLYING SHOT-TERM INTERMEDIATE ANNEALS IN BACK-PRESSURE EQUAL-CHANNEL ANGULAR PRESSING OF ALUMINUM ALLOYS

2019

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.17804/2410-9908.2019.1.043-054
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

The influence of severe plastic deformation on hypoeutectic silumin is studied.A positive effect of equal-channel angular pressing with back pressure on the mechanical properties of the AL9 alloy of the Al-Si-Mn-Fe system has been found experimentally.The evolution of the microstructure in the process of deformation is estimated.The effect of short-term intermediate anneals on the microstructure, mechanical properties and ultimate plasticity of the alloy is studied.As a result of additional annealing, significant microstructural changes do not succeed, but the coagulation of excess phases proceeds very intensively, which causes a 20 % increase in strength after the second deformation cycle.Fractographic studies demonstrate the presence of coagulated particles on the samples deformed with the use of short-term intermediate anneals.Limiting plasticity also rises to 0.2 as compared to 0.12 for the samples treated with only ECAP-BP.