MODIFICATION OF COATINGS BASED ON Al2O3 WITH CONCENTRATED ENERGY FLOWS

2021

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.32014/2021.2518-170x.72
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

This paper presents the study results of structural-phase composition and mechano-tribological properties of Al2O3 coatings after exposure of concentrated energy flows. Revealed that the treated coatings are generally characterized by high microhardness compared to the initial coating. Determined that after treatment with detonation and air-plasma action is observed an increase in the intensity of α-Al2O3 reflexes. Established that the increasing hardness of detonation coatings is associated with an increasing density of the material and the recovery of the α-phase Al2O3 in the composition of the protective layer under the influence of thermal activation of the surface. Determined that after treatment with detonation and plasma exposure is observed an increase in the intensity of reflexes α-Al2O3. Established that the treatment with detonation and air-plasma action leads to a decrease in the friction coefficient. The obtained data indicate that the tribological characteristics of coating based on aluminium oxide can be improved by exposure to concentrated energy flows. Established that coatings treated with plasma action showed high tribological properties.