Regulation of high-temperature blast-furnace processes by adjusting the fuel-additive supply

2015

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.3103/s0967091215080161
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

A method is developed for analysis of the processes in the tuyere zone. Analysis permits calculation of the change in the yield, composition, and temperature of the intermediate gas at the axis of the tuyere zone and determination of the final composition of the hot reducing gases at the output from this zone. The quantitative ratios of the residual oxygen ΔO 2 and the oxidized gases CO 2 and H 2 O along the axis of the tuyere zone in the combustion of fuel additives are established. It is possible to regulate the proportions (by volume) of the gases ΔO 2 , CO 2 , and H 2 O in coke consumption so as to ensure heat transfer from the wall to the center of the furnace. If the fuel-additive consumption is regulated according to specific technological protocols, the additives may not only be regarded as a replacement for coke but will also provide information regarding the blast-furnace process. A formula for the degree of direct reduction of the metals is derived. Continuous determination of the direct reduction will also provide valuable information regarding the process.