Simulation Analysis of PI and Fuzzy Controller for Dynamic Wireless Charging of Electric Vehicle

2020

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.1109/eeeic/icpseurope49358.2020.9160851
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Power pulsations are one of the factors that impede the adoption of electric vehicles (EVs) equipped with dynamic wireless power transfer (WPT) systems. The unstable output voltage, current and power parameters, which are common for such systems, can be mitigated by incorporating a DC-DC converter and a controller into the system. The given manuscript analyzes the performance of the Proportional-Integral (PI) feedback controller and a Fuzzy controller, which are utilized to manage the output of the Buck-Boost converter of the wireless charging systems for EVs. The dynamic WPT system under consideration is simulated using a graphical programming environment. It was revealed that both controllers significantly reduce the power pulsation. However, PI controller reduces the power pulsation ratio from 40% to almost 0% after 0.45 s, whereas Fuzzy controller decreases the power pulsation ratio from 40% to nearly 5% after 0.09 s.