Irradiation experiments with Li2TiO3/Li4SiO4 two-phase lithium ceramics at the WWR-K reactor

2025

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.26577/rcph202592110
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Advanced two-phase lithium ceramics Li2TiO3-Li4SiO4 are considered as a potential candidate for use in solid-state fusion reactor blankets. This phase composition makes it possible to combine the high lithium content in orthosilicate Li4SiO4 with the mechanical strength of lithium metatitanate Li2TiO3. The study of the effect of neutron irradiation on two-phase lithium ceramics, as well as the correlation with its structural and physical properties, remains quite relevant, taking into account the technological diversity in the manufacture of the ceramics themselves and ceramic pebbles. This paper presents the results of an experiment on reactor irradiation of two-phase ceramics 25mol% Li2TiO3 + 75mol% Li4SiO4 obtained on the KALOS installation (KArlsruhe Lithium OrthoSilicate) using a modified melt-spraying technique. Neutron irradiation was carried out at the WWR-K research reactor (Almaty, Kazakhstan) for 21 days at a sample temperature of 50 °C. The accumulated fluence for thermal neutrons was 3.7·1019 n/cm2. The nuclear reaction rate was 2.16·1013 reactions/cm3⋅s; the damage rate was 7.63·10-8 dpa/s, the damage during the irradiation period was 0.14 dpa.