Investigation of Physical and Mechanical Properties of Hot Dry Rock as a Geothermal Energy Source After LN2 Cooling

2024

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.2118/220116-ms
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Abstract To investigate the impact of liquid nitrogen (LN2) as a stimulation method to increase reservoir contact with hot dry rock, we carried out a sequence of physical and mechanical examinations on Kazakhstani granite specimens. Granite samples were gradually heated to desired temperatures ranging from 50 °C to 500 °C. Subsequently, rapid cooling was implemented using two different coolants: water, and LN2. Following the thermal treatments, we conducted tests to evaluate both the physical and mechanical properties of the samples. Based on the experimental findings, the permeability of the heated granite samples notably rises following LN2-cooling, accompanied by reductions in P- wave velocity, and strength, as evidence of internal thermal shock fracturing. As the initial temperature increases, these alterations in properties become more pronounced. In comparison between water-cooling and LN2-cooling, the latter leads to more significant changes in both physical and mechanical properties across all target temperatures. This suggests that LN2-cooling can yield more effective stimulation of hot dry rocks compared to the water-cooling method.