SYNTHESIS OF MULTICOMPONENT HEAT-SHIELDING RADIATION-RESISTANT CERAMICS WITH VARIATION OF STOICHIOMETRY OF CERAMIC COMPONENTS

2024

Толық мәтін Ашық қол жеткізу: Hybrid Метадеректер (CSL-JSON)
DOI 10.52676/1729-7885-2024-1-45-54
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

The paper presents the results of obtaining multicomponent heat-protective radiation-resistant ceramic materials based on the WO3–Bi2O3–ZnO–TeO2–CeO2–ZrO2 compounds obtained by mechanochemical solid-phase synthesis with further annealing at a temperature of 1000 °C. The introduction of doping substances into the structure in the form of metal oxides makes it possible to prevent undesirable structural changes in ceramics and improve the durability and stability of the system. The choice of the synthesis of ceramics based on zirconium oxide is associated with the presence of several valuable physical and mechanical properties of the substance, and, as a consequence, the possibility of application in the field of functional materials for use in a variety of technical fields. The processes of phase formation in multicomponent ceramics based on oxide refractory compounds (WO3, Bi2O3, ZnO, TeO2, CeO2, ZrO2) were studied by scanning electron microscopy, energy dispersive and x-ray phase analysis methods. Using a combination of the presented methods, the following results were obtained, which make it possible to comprehensively characterize the samples under study, as well as establish the dependence of the influence of variations in the oxides used on the phase composition and morphological features of the ceramics. Analysis of morphological parameters showed that with increasing dopant concentration, a denser structure of agglomerates is formed, which is associated with sintering of particles at higher dopant concentrations. According to the obtained results of energy dispersive analysis, it was found that the addition of ZrO2 results a slight redistribution of elements in the structure, so the atomic content of Ce, W, Bi, and Te decreased by 2.58; 3.38; 2.12; 1.91 times, respectively, and the atomic content of Zn increased by 1.32 times. Analysis of diffraction patterns showed that the studied samples WO3-Bi2O3-ZnO-TeO2-CeO2-ZrO2 are characterized by the content of Zn3(TeO6), ZnTeO3, CeO2, Bi2O3, Bi2WO6, ZnWO4, Ce5Zr3O16, ZnO, (Zr0.98Ce0.02)O2 phases.