Investigation of the effect of short-term exposure of oxygen and hydrogen plasma on the composition and structure of thin tin dioxide films

2021

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.17073/1609-3577-2021-2-119-130
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Modern technologies cannot do without the production of thin films of tin dioxide, which are most widely used mainly in three areas: as transparent electrodes, catalysts, and solid-state sensors of various gases. Their use as transparent electrodes is associated with a high transmittance of tin dioxide layers in the optical range, as well as with their low electrical resistivity. The effect of short-term exposure to plasma on the composition and structure of thin films of tin dioxide obtained from a solution of pentahydrate tin tetrachloride in 97% ethanol with different concentrations of tin ions is considered. A linear character of the dependence of the thickness of the tin dioxide SnO2 films on the concentration of the solution and the number of deposited layers is revealed. A decrease in the electrical resistance of the films with an increase in the concentration of the initial solution and an increase in the number of layers was found. It is shown that the treatment of SnO2 films with hydrogen plasma makes it possible to reduce their electrical resistance of the films without decreasing the transparency. Treatment with oxygen plasma reduces the transparency of the SnO2 films, and the resistance of the films increases with an increase in the duration of such treatment.