Аңдатпа
In this paper, was performed by numerical work according to the difference scheme. Analysis of the numerical results showed: one of the important issues of contact interaction is to determine the duration of the impact of the colliding bodies. Obviously, under the condition of a hard clutch, sticking of the striker from the barrier will not occur. To study the process of complete breakage of mechanical contact (appearance of separation zones), we will use boundary conditions that simulate a perfectly smooth impact. Analysis of the dynamics of contact resistance has shown that its magnitude and features of evolution over time substantially depend on the geometric and physicomechanical parameters of the deformable system, as well as on the type of boundary conditions. An increase in the acoustic rigidity of the impactor leads to an increase in the amplitude and duration of the impact. The impact of a less rigid punch or the presence in the barrier of a shielding layer of a polymeric material reduces the contact resistance of the plate, but the force interaction between the impacted bodies is longer. As the analysis of the results shows, the evolution of contact stresses is characterized by a number of specific features. For example, there is a direct correlation between the height of the cylinder and the time of its complete detachment from the obstacle, which corresponds to the vanishing of the function tk . An increase in the acoustic rigidity of the impactor leads to a sharp increase in the amplitude of the total resistance and an increase in the duration of the contact interaction. Thus, the contours of the isolines provide a visual representation of the configuration of the areas at which points the stresses develop, immediately preceding the appearance of elastoplastic deformations for spall fractures (for brittle materials).