Аңдатпа
Abstract The paper presents the results of studying the structure of products made of titanium carbide hardened by the impregnation method. As a bonding alloy a high-temperature alloy of the Fe-Cr-Ni-Co system was used. Samples of different porosity were impregnated with that alloy, then their structure was investigated by the methods of mercury porosimetry and electron microscopy. The data of the parameters of porosity and some mechanical properties are given. It was found that there is a correlation between the average size of open pores and the tensile strength and the ultimate strength limit. It is shown that this relationship is logical if to consider the resulting structure as a composite material: the matrix of titanium carbide which pores are filled with a metal bond. It is shown at what parameters of the porous structure the impregnation process proceeds most fully.