The effect of composition and conditions of preparation of graphene oxide Langmuir films on their electrophysical parameters

2017

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.1109/nap.2017.8190222
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

The influence of deposition parameters of LB films on structural, optical, and electrophysical properties of graphene oxide films was studied. It was shown that the film, obtained at low surface pressure, is more uniform in structure, but its optical density is 30% smaller than that for the film obtained at high pressure. When analyzing the area occupied by the LB film on the surface, it was found that all monolayers on a solid substrate occupy about 80% of the total area under study, which agrees well with data of the film transfer coefficient. On the basis of the data obtained from impedanceometry, it is established that for electrodes based on SLGO LB films, the resistance to charge transfer associated with the recombination of an electron into an electrolyte is in many times greater than the value obtained for a platinum electrode, which may be due to the lack of good contact between individual particles of graphene oxide on the FTO surface.