Аңдатпа
The results of studies on the development of a new process of thermal cracking of tar oil as a slurry with crushed oil shale to obtain components of motor fuels. The results suggest doubtless advantages of the process before the industrial of thermo cracking, since the single-stage processing of raw materials in relatively in the mild conditions (5 MPa, 425 °C, volumetric feed rate 1.0 h-1) is achieved deep destruction of tar oil (the yield petrol fraction with a bp amounts to up to 180 °C – ~12 mass % of middle distillates with a bp 180-360 °C – 43-44 mass %, of raw material for catalytic cracking of a bp 360-520 °C – ~15-16 %, based on the initial tar oil). Formed like coke products and raw materials contained in V and Ni is postponed on the mineral part of slate and removed from the reaction zone with the liquid products of the process.