INFLUENCE OF VARIOUS PARAMETERS ON THE DEFLUORINATION OF WET-PROCESS PHOSPHORIC ACID

2021

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.31788/rjc.2021.1446472
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

One of the important sources of raw materials for the production of mineral fertilizers in wet-process phosphoric acid (WPA).It is known that WPA is obtained by treating natural raw materials directly with sulfuric acid.Since WPA is used in the production of mineral fertilizers, it is necessary to solve environmental problems with the rational and comprehensive use of mineral raw materials.This is because, during the extraction of natural raw materials, all impurities contained in phosphate raw materials are transferred to the composition of WPA.Therefore, the main goal is to clean the WPA from impurities.This article discusses the purification of WPA from the fluoride deposition method with the use of inorganic reagents.As the inorganic reagent for defluorination WPA used sodium salt.The influence of temperature, time and norm of sodium salt on the deposition method is studied.As a result, the optimal parameters of the purification of WPA by precipitation were determined: the norm of sodium salt -140% of stoichiometry; temperature -40-50 0 C; time -30 min.Under these conditions, the degree of purification of WPA from fluorine is 84%.The size of the crystals formed during the deposition of sodium silicofluoride is 40-50 microns.Composition of the purified WPA under these conditions (wt.%): P2O5 -19; F -0.24.