Effect of thermomechanical impacts on the deformation of thin polyimide films at uniaxial tension

2020

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.1088/1757-899x/754/1/012012
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Abstract Thermomechanical studies of the dependence of deformation (ε) on time (t) and temperature (T) for various static stresses in polyimide under uniaxial tension were carried out. Temporal deformation curves for static stresses in the range from 75 to 110 MPa consist of two stages: 1 – increase; 2 – exit to saturation, which is associated with a change in the nature of structural transformations of macromolecules, due to the action of the static stresses. An increase in temperature and voltage leads to an increase in the dependence ε (T). This is due to the intensification of the processes of structuring macromolecules with increasing temperature and are supplemented by processes of breaking bonds between macromolecules, which increase the strain rate. Experimental data are described in terms of exponential and linear models.