Аңдатпа
At present, at almost all fields of the Republic of Kazakhstan the main technology of oil recovery enhancement is the traditional method of waterflooding of productive formations. Many oil and gas fields in Kazakhstan are at a late stage of development and are categorized as «mature» fields. In the global experience of mature field development, the key focus is on the application of enhanced oil recovery (EOR) techniques - chemical, thermal, gas and microbiological methods. This paper considers the application of chemical EOR at a number of Kazakh fields such as Zaburunye, North Buzachi, Kalamkas, East Moldabek. As the results of the pilot studies have shown, the most effective EOR here is the application of polymer flooding. It should also be noted that polymer flooding is successfully applied in Kazakhstan for high-viscosity oil fields such as North Buzachi (oil viscosity 316-417 mPa·s), East Moldabek (oil viscosity 246-377 mPa·s). In this case, water cut, smoothing of injectivity profile and, as a result, increase of oil production is achieved. Successful application of the technology largely depends on the parameters of physical and chemical impact at each stage - the volume of injection of gel-polymer composition, concentration of ingredients, the flow rate of filtered water, the presence and linear size of cracks, the permeability of pore channels and etc. Polymer flooding applied in Kazakhstan showed its technological and economic efficiency on the example of pilot tests, laboratory studies, which reduces water cut and increases oil production. Widespread use of EOR methods would allow increasing recoverable oil reserves by at least 5-10 %. Keywords: Enhanced Oil Recovery (EOR); gas Injection; hydrocarbon recovery methods; chemical EOR methods; thermal EOR methods; oil production; polymer flooding; oil recovery.