Аңдатпа
Abstract The aim of the study is to substantiate the parameters of technology and equipment for the manufacture of building products using alumina sludge from stone processing as an alumina aggregate. The standard methods of setting up an experiment for laboratory washing of granular sludge from stone processing and studying its physical and mechanical characteristics, manufacturing laboratory samples of polystyrene concrete blocks with further study of their strength characteristics were used. The physical and mechanical characteristics of granular man-made material - sludge waste from the stone processing industry - were experimentally determined. The possibility of using man-made sludge in the manufacture of polystyrene concrete blocks was substantiated by its particle size distribution and mineralogical composition. Average samples of granular material were deslagged using the TurboWash unit. The particle size distribution of the material after washing was analysed. According to the standard technology, recipe and raw materials for D300 polystyrene concrete, polystyrene concrete blocks of standard sizes of three grades were produced. Primary sludge without preliminary processing, sand and dusty loess obtained from the processing of primary sludge were used as an aggregate. The numerical values of the axial compression resistance for the studied grades of polystyrene concrete blocks were determined.