Adding carbon-bearing waste to coke in ferrosilicon and zinc-phosphide production

2014

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.3103/s1068364x14120084
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

The focus of the research is to establish whether blast-furnace coke may be partially replaced with inexpensive material obtained by processing wastes from phosphorus production and from lead and zinc production, as well as coal-mining wastes in Kazakhstan. On the basis of ferrophosphorus (waste from phosphorus production) and slag (from lead and zinc production), with quartzite flux, a waste-free production cycle may be organized. Commercial products are obtained: ferrosilicon, calcium silicate, and zinc phosphide. The introduction of coal-mining wastes permits reduction in coke consumption and also in the viscosity of the slag obtained, on account of fusible impurities. That improves the process, with economic and environmental benefits. Laboratory experiments give rise to a test program conducted on a prototype 2-MV A furnace at TOO Kainar. The products in the tests are as follows: 400 kg zinc phosphide, 3.7 t ferrosilicon, and around 2.4 t of silicocalcium, meeting the corresponding quality standards. The tests show that it is feasible, at the industrial level, to generate commercial products on the basis of wastes from phosphorus production and from lead and zinc production, as well as coal-mining wastes.