Thermal properties of nanocrystalline copper sulfides KxCu1.85S (0 < x < 0.05)

2022

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.22226/2410-3535-2022-3-191-196
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

This paper presents the comparative data on thermal properties of five compounds of nanocrystalline copper sulfides KxCu1.85S (0 < x < 0.05) at the temperature range from 300 to 700 K. X-ray phase analysis shows that Cu31S16 (or Cu1.9375S) monoclinic djurleite phase are found as prevailing in all KxCu1.85S samples (0.01< x < 0.05). Also in all samples there are oxygen oxide Cu2O and orthorhombic anilite Cu7S4 (Cu1.75S). Variable components of the alloys are monoclinic and hexagonal chalcocite, triclinic roxbyite. The sizes of crystallites in the alloys estimated from half-width of X-ray lines are in the range from 11 to 265 nm at room temperature. Differential scanning calorimetry revealed considerable endothermic thermal effect in the temperature range from 370 to 375 K for all compounds, obviously caused by the superionic phase transition from monoclinic djurleite to hexagonal chalcocite. The thermal conductivity of alloys decreases to 0.16 ÷ 0.25 W K−1m−1 in the temperature range of 450 – 600 K due to an increase in the amount of potassium (for x = 0.04, 0.05). This favors the achievement of high thermoelectric figure of merit of the material. The obtained results are important for semiconductor materials used in the field of thermoelectric devices.