Improvement of a Preparation Process of Chromite Raw Material Used for Ferroalloys and Pigments Manufacture

2015

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.18321/ectj251
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

The given article contains the research results of carbon-containing chromite pellets’ production from off-grade raw material with application of internal coal-mining overburden rocks as flux. Besides, for the purpose of improvement of ecological situation in industrial regions and expansion of a raw-material base for ferrochrome and pigments manufacture we suppose to use in a charge composition the dust of aspiration units and electrostatic precipitators, which is formed at the preparation of raw materials and production of chromite pellets. The production technology of chromite pellets with use of a slime formed at the concentration of chrome ores as a binding substance was developed. Testing the suggested technology has been carried out in laboratory and trial conditions. The data of a chemical composition of initial components of a charge and calcined carbon-containing chromite pellets have shown economic and ecological efficiency of the developed technological process. Research results lead to the conclusion that the proposed granulation feedstock mixture pellets with a moisture content of 11–12% are obtained crude granules havea compressive strength of 2.3–3.2 kg/splashed. Increasing the content of Cr2O3 in the pellets to 7.6% occurs due to the increase in the extraction of chromium oxide and due to the charge of chromium oxides contained in the sludge, as well as removal of the batch formulation was heat treated carbonates, and volatile organic substances. It was established that during this mode, the temperature in the lower layers is about 1200 °C, and a reduction in natural gas consumption achieves 50% and the residual carbon content in the pellets is about 1.5%, which leads to improvement of technical and economic indices of production chromite pellets and ferrochrome.