Аңдатпа
The given article is devoted to research of influence of polymer modifiers and mineral additives on quality of composite aerated concrete products. When selecting the composition of composite aerated concrete local raw materials and components were used: portland cement, sand, aluminum powder, polyvinyl acetate, fly ash, post-alcoholic bard and whey of milk. Preliminary polyvinyl acetate was combined with binder mixing water at a temperature above 55ºC to obtain a readily soluble polymer emulsion. Dispersion was carried out with a rotary-pulsation apparatus at a pressure of 0.5-1.0 MPa and a rotor speed of ~1200 rpm. In the same apparatus the complex modifier was produced. The offered technology of production of a complex modifier seems to be the most effective for composite aerated concrete. It made it possible to reduce water absorption and capillary suction of composite aerated concrete by an average of 25% and 45%, respectively. Moreover, different combinations of fly ash, polymer and modifier made it possible to achieve optimal values of thermal conductivity, compressive strength and frost resistance of composite aerated concrete.